500 Gal Pump House

Built for your project, not pulled off a lot.

We build the pump house around your site: a 500 gal potable holding tank, two delivery pumps, and insulated, heat-traced supply lines run to your trailer. Fill connection and overflow outlet on the front wall.

Front Inside Rear
{{ doorsLabel }} {{ themeLabel }}

Rough 3D model. Drag to orbit. Click the door to open it.

500
Gallons of potable water in the holding tank
2
Water delivery pumps, each with isolation valves
3 in
Sch. 40 PVC waste drain line to the holding tanks

Laid out for your site. Filled from the outside.

Every pump house is built for the project it serves: tank, pumps, and line runs laid out for your trailer and your site. The camlock fill connection and overflow outlet sit on the front wall, so the tank fills without opening the door.

Inside, a 500 gal potable holding tank certified to NSF/ANSI/CAN-61 feeds two delivery pumps on a valved manifold. Rigid foam insulation lines the walls and roof.

Pump house with the door open beside a trailer, tank and pumps visible
In service, door open
Two delivery pumps with pressure tanks on a valved manifold in front of the holding tank
Two delivery pumps, valved manifold
Camlock fill connection and overflow outlet on the front wall
Fill connection and overflow outlet
Potable water tank label certified to NSF/ANSI/CAN-61
NSF/ANSI/CAN-61 potable water tank

Heat traced to your trailer.

Supply lines run from the pump house to your trailer wrapped in insulation with heat trace underneath, at the length your layout needs. The heat trace plugs in at the trailer.

Waste out the same way.

A 3 in Sch. 40 PVC drain line runs from the trailer to insulated waste holding tanks, extending capacity beyond the trailer's onboard tank.

Critical specifications.

Holding tank500 gal potable water tank, certified to NSF/ANSI/CAN-61
Supply linesInsulated with heat trace underneath, pump house to trailer
Delivery pumps2, on a valved manifold with isolation valves
Waste drain3 in Sch. 40 PVC to insulated waste holding tanks
FillCamlock fill connection, front wall
EnclosureInsulated walls and roof, hinged door with hasp, exterior light
OverflowOverflow outlet, front wall
Power120V, pumps and heat trace

Veteran owned.

AMERI-CANS is a veteran-owned business.

Let us build one for your project.

Send the site address, start date, and expected peak headcount.

Request a quote
{{ contactEmail }}